Fishingmagnet 116x32mm doublesided magnet M10 with screw eye 4000N
Artno: 61-6116-10
| Magnet properties | |
|---|---|
| Magnet type | Fishing magnet |
| Material | Neodymium |
| Coating | NiCuNi |
| Strength [N] | 4000 (each side) |
| Holding magnet | |
| Outer ØD [mm] | 116 |
| Thickness T [mm] | 32 |
| Thread M | M12 |
| Weight [g] | 2600 |
| Max temp. [°C] | 80 |
Description
WARNING! STRONG MAGNET! CRUSH HAZARD!
A magnet designed to throw into the water and catch ferromagnetic treasures. With a combined strength of approx. 800kg (400+400), it grabs most things down on the bottom. The screw loop is removable. We recommend using a thread lock to avoid losing the magnet under the surface.
Since it is a neodymium magnet (super magnet) in this article, it is important that the magnet is wiped off after use, so it stays free of rust for as long as possible! Note that the specified strength is calculated in optimal conditions on a 10mm thick iron plate and will be lower if you do not get an optimal hit under the water surface.
The stated forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation.