Hex bolt
The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.
The stated forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation.
| Article no | Thread MxL | Thickness T [mm] | SW [mm] | Strength [N] | Weight [g] | Max temp. [°C] | Request for offer |
|---|---|---|---|---|---|---|---|
| 61-0606-12 | M6x12 | 16 | 10 | 25 | 6 | 80 | |
| 61-0606-16 | M6x16 | 20 | 10 | 25 | 6 | 80 | |
| 61-0606-20 | M6x20 | 24 | 10 | 25 | 7 | 80 | |
| 61-0606-25 | M6x25 | 29 | 10 | 25 | 8 | 80 | |
| 61-0606-30 | M6x30 | 34 | 10 | 25 | 10 | 80 | |
| 61-0608-16 | M8x16 | 20.3 | 13 | 50 | 11 | 80 | |
| 61-0608-16-02 | M8x16 | 20.3 | 13 | 65 | 11 | 80 | |
| 61-0608-20 | M8x20 | 25.3 | 13 | 50 | 12 | 80 | |
| 61-0608-25 | M8x25 | 30.3 | 13 | 50 | 15 | 80 | |
| 61-0608-30 | M8x30 | 35.3 | 13 | 50 | 17 | 80 | |
| 61-0608-40 | M8x40 | 45.3 | 13 | 50 | 21 | 80 | |
| 61-0610-20 | M10x20 | 26.4 | 17 | 75 | 24 | 80 | |
| 61-0610-25 | M10x25 | 31.4 | 17 | 75 | 27 | 80 | |
| 61-0610-30 | M10x30 | 36.4 | 17 | 75 | 31 | 80 | |
| 61-0610-40 | M10x40 | 46.4 | 17 | 75 | 37 | 80 | |
| 61-0610-50 | M10x50 | 56.4 | 17 | 75 | 43 | 80 | |
| 61-0612-25 | M12x25 | 32.5 | 19 | 110 | 40 | 80 | |
| 61-0612-30 | M12x30 | 37.5 | 19 | 110 | 45 | 80 | |
| 61-0612-40 | M12x40 | 47.5 | 19 | 110 | 54 | 80 | |
| 61-0612-50 | M12x50 | 57.5 | 19 | 110 | 62 | 80 | |
| 61-0612-60 | M12x60 | 67.5 | 19 | 110 | 71 | 80 | |
| 61-0616-30 | M16x30 | 40 | 24 | 145 | 86 | 80 | |
| 61-0616-40 | M16x40 | 50 | 24 | 145 | 100 | 80 | |
| 61-0616-50 | M16x50 | 60 | 24 | 145 | 117 | 80 | |
| 61-0616-60 | M16x60 | 70 | 24 | 145 | 133 | 80 | |
| 61-0616-80 | M16x80 | 90 | 24 | 145 | 165 | 80 |
