Electricial holding magnet
Hyab supplies electric holding magnets in three different series, this means that we will be able to give our customers the best offer and with a great delivery time. Our standard assortiment are constructed for 24VDC, 100%ED.
Stated holding force applies in ideal conditions without safety factor. Force: 1kg ~ 10Newton. Note that holding magnets releases at given strength (in ideal conditions). Always use some margin.
EDs is a percentage measure of the connection time. If the magnet is supposed to work shorter period of time (lower ED), you can increase voltage and get more power. Lower voltage gives lower force.
| Article no | Outer ØD [mm] | Thickness [mm] | Hold force [N] | Thread MxL | Voltage [V] | Power [W] | Request for offer |
|---|---|---|---|---|---|---|---|
| 71-1007 | 100 | 45 | 3430 | M10x25 | 24DC | 23.8 | |
| 71-1080 | 80 | 40 | 2350 | M8x20 | 24DC | 19.3 | |
| 71-1060 | 60 | 30 | 980 | M8x20 | 24DC | 8.2 | |
| 71-1050 | 50 | 28 | 686 | M6x15 | 24DC | 6 | |
| 71-1040 | 40 | 26 | 392 | M6x15 | 24DC | 4.6 | |
| 71-1030 | 30 | 20 | 147 | M6x13 | 24DC | 4 | |
| 71-1020 | 20 | 20 | 39 | M4x13 | 24DC | 4.5 |
| Article no | Outer ØD [mm] | Thickness [mm] | Hold force [N] | Thread | Voltage [V] | Power [W] | Request for offer |
|---|---|---|---|---|---|---|---|
| 71-0010 | 250 | 80 | 25490 | M24 | 24DC | 120 | |
| 71-0009 | 180 | 63 | 7500 | M24 | 24DC | 50 | |
| 71-0008 | 150 | 56 | 4600 | M16 | 24DC | 37.5 | |
| 71-0007 | 100 | 43 | 3330 | M10 | 24DC | 25 | |
| 71-0006 | 80 | 38 | 2150 | M8 | 24DC | 17.2 | |
| 71-0065 | 65 | 30 | 980 | M8 | 24DC | 10 | |
| M7104-M8 | 50 | 27 | 685 | M8 | 24DC | 7 | |
| M7104 | 50 | 27 | 685 | M5 | 24DC | 7 | |
| M7104-12V | 50 | 27 | 685 | M5 | 12DC | 7 | |
| 71-0040 | 40 | 25,5 | 390 | M5 | 24DC | 5.3 | |
| M7103 | 32 | 22 | 225 | M4 | 24DC | 3.4 | |
| M7102 | 32 | 22 | 225 | M4 | 24DC | 3.4 | |
| 71-0025 | 25 | 20 | 135 | M4 | 24DC | 3.2 |
