Magnet properties | |
---|---|
Magnet type | Holding magnet |
Material | Ferrite / Rubber Coat |
Strength [N] | 250* |
Holding magnet | |
Outer ØD [mm] | 57 |
Length L [mm] | 5 |
Thickness T [mm] | 9 |
Thread M | M6 |
Max temp. [°C] | 60 |
The stated forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation.
NOTE: The stated strength is without a rubber cover! With a rubber cover on, the holding force is noticeably worse. However, the shear force becomes stronger.
Maximum working temperature is 60°C with the rubber cover on and maximum 200°C without the rubber cover.
Success
You have added Holding magnet Ferrite 57x9mm male M6 250N + rubber jacket to your quotation request.